Frost depth in North Dakota
The frost depth in North Dakota is 60″. That is the line the ground freezes to. A footing has to sit below it, so the hole is 66″ deep — not 60″.
North Dakota frost depth and the depth you dig
| What | Depth |
|---|---|
| Frost depth in North Dakota | 60″ |
| Working allowance below the frost line | 6″ |
| Hole depth to dig in North Dakota | 66″ |
Why the North Dakota hole goes deeper than the frost line
The frost depth is where the soil freezes solid. Below that line the ground stays workable all winter, which is what lets a footing bear its load instead of being lifted by frozen soil heaving upward. The allowance on top of that is the working room the footing needs above the frozen zone — the part of the hole that sits in seasonally frozen ground rather than permanently frozen soil.
Skipping the allowance is the most common reason a footing is rejected in North Dakota. It is also the most expensive kind of mistake, because a deck that has already been framed and decked has to come apart to fix it.
Where North Dakota sits
North Dakota is in the Northern Plains band. North Dakota is one of the shallowest frost depths to hit 60 inches. Every footing goes below that line, and a frost-susceptible or expansive soil may need more depth or a different footing design entirely.
What a North Dakota frost depth number does not cover
- It does not replace your North Dakota building department. The state figure is the common published value. Your county may enforce a deeper one, and in a few cases a shallower one.
- It does not cover soil conditions. Frost depth is about temperature. Fill, expansive clay, or rock at the bottom of the hole is a different problem that the depth number does not solve.
- It does not cover load. Footing diameter and thickness come from the load the deck puts on it, not from how cold it gets. See the footing calculator for that side.
- It does not cover unheated spaces. A deck attached to the house is usually over unheated space; a deck over a heated room or a crawlspace with a heat source may be exempt from part of the frost requirement. Ask.
Before you dig in North Dakota
- Call the North Dakota county building department and ask for the frost depth they enforce for your address. Ask for the number they put on the permit, not the state default.
- Dig to the depth above, and check what is at the bottom. Rock means a different footing. Soft fill means you are probably into a footing design question, not a depth question.
- Get the permit before the hole is in the ground. Almost every jurisdiction requires it for an elevated deck, and almost none of them check the footing afterwards.
Other North Dakota footing references
- Frost depth and footings — the general version, without a state
- Frost depth by state — every state
- Deck footing calculator — concrete volume and bag count
- Deck code checklist — the rest of what a permit will ask for
Questions people actually ask
How deep do deck footings go in North Dakota?
Below the frost line. In North Dakota that is 60″, so the hole is 66″ — the extra 6″ is working room above the frozen zone. Your county building department enforces the number that goes on the permit.
What is the frost depth in North Dakota?
60″. That is the depth the ground freezes to. North Dakota sits in the Northern Plains band.
Do I need a permit for a deck in North Dakota?
Almost always, for an elevated deck. The permit is what forces the frost depth question to be answered with your county's number rather than a general one — and it is checked before the hole is dug, not after.
Can I use a shallower footing in North Dakota?
Not on a cold-structure footing. A footing above the frost line gets lifted by heave, which takes the deck out of level and racks the frame. The exception is a footing on rock or on a foundation that does not move with the soil — an engineered decision, not a shortcut.